DEUTZ D80 FOUR WHEEL DRIVE YEAR 1965 V1.1.0

Description:
Hello Community, it’s time again!
Another restored 6-cylinder iron pig from long gone days is ready in front of the workshop. A Deutz D80 four-wheel year 1965!


But it’s not just any D80, but the last D80 that rolled off the line in January 1965 before the series was seamlessly incorporated into the 05 series. But at this time, our object of desire was not yet equipped with four-wheel drive, but more on that later 🙂
Jez first what about the tug …..

The D 80 was intended as a six-cylinder only for large-scale operations and haulage contractors, which is recognized by the small number of only 64 built models. He was the first six-cylinder tug from German production. There are two abnormalities through which you can recognize the D 80, these are the split exhaust manifold and the split bonnet. In virtually unchanged form, the D 80 was adopted in the 05 series and continued as D 8005. The tractor was powered by an air-cooled four-stroke in-line six-cylinder diesel engine type KHD F6L 812 with 5,104 cc and 75 hp.
And what have we made there jez again?! …… why has the four-wheel?
So we found the remains of a rusty D80 that had suffered a broken axle.
In the search for a new front axle, we came across a Güldner four-wheel front axle with all attachments and knew it was a long night but it was worth it 🙂
What can the cart jez eig?! What is it all installed?! …..
Model of Giants from the Ls13 classic agriculture Dlc
Restoration April 2018
-Ic control
-Animated Indoor Script (Ifko)
-Complete interior Animated including throttle and gearshift
-Gearbox and Oilchange Mod Ready
-Pendelachse, propeller shaft and PTO muff animated
Transmission block for cardan shaft installed
Cover and roll bar installed (bluepuma)
Deck completely controllable via IC …..
-Klinklader
-FL tools are included including a homemade dung fork the Oldenfarm has built
-Druckluftbremsanlage
-Dynamic pants (2x compressed air 3xHydraulik 1xElektro)
-guard rail and new pulling mouth (Schlüterfan1977)
-Weights block welded and adjusted
Grid wheels (Schlüterfan1977) about design configuration
-Motor Configuration (It is possible to install the 85HP D9005 engine)
Tire configuration (standard tires, care tires, wide tires)
-Optional with soft top, roll bar and nothing at all with child seat: D
-32km / h fast
-Animated speedometer instruments
-New sound (RetroFarmer)
-uvm.

The mod is not perfect …. but about little quirks, the oldtimer lover has to go there … like in real life 🙂 🙂 🙂

################################################## #############################
To get into the full enjoyment of all features please use Gearbox and Oilchange mod !!!!!!
https://www.farming-simulator.com/mod.php?lang=de&country=de&mod_id=65562&title=fs2017
http://forum.blackpanthergroup.de/viewtopic.php?f=24&t=699&sid=203098ec2b1c0658c47eda1f6d5f3c89#p12706
################################################## #############################
The conversion was carried out by Dani86 and Oldenfarm
Thanks to Schlüterfan1977, bluepuma and Ifko for your releases.
A special thanks to the many little heroes of everyday life without this project would not have been Realized!

Who finds fault can gladly report by PM.
The same applies to release related things !!! PN !!!
Comments in this regard are ignored

Credits: Modell: Giants Software
Textur: Giants Software,Dani86,bluepuma
Script: ifko,Giants Software
Idee / Konzept: Dani86,Oldenfarm
Tester:Dani86,Oldenfarm
Sonstige: Schlüterfan 1977

FS17_Deutz_D80A_1965new (file size = 41 MB)

Leave a Reply

Your email address will not be published. Required fields are marked *