? ? ?高空作業平臺是用于戶外或室內的可移動式升降平臺。現被廣泛用于各行業高空作業、設備安裝、檢修等。高空作業平臺相關產品主要有：直臂/曲臂式高空作業平臺、剪叉式高空作業平臺（人工手推式、自行走式）、桅柱式高空作業平臺、套缸式高空作業平臺、蜘蛛式高空作業平臺七大類。高空作業平臺以自身的可移動性、靈活操作性而廣受各行業消費者喜愛。隨著高空作業平臺在國內市場認可度越來越高，平臺的使用范圍也越來越廣。因此對高空作業平臺的規范操作就變的尤其重要。下面，就為大家介紹一下如何規范操作高空作業平臺。

? ? ? ◆1、使用高空作業平臺作業時必須配置專業操作人員，并經過專門培訓，并考試合格，持證上崗。
? ? ◆2、高空作業平臺駕駛員必須按照機械的保養規定，在執行各項檢查和保養后方可啟動設備，作業前應檢查設備的工作范圍，并清除妨礙設備作業及行走的障礙物。
? ? ◆3、支腿是高空作業平臺操作的一項重要準備工作，應選擇平整的地面，地基松軟或起伏不平的地面，必須加墊材料保證受力后，才可進行工作。

? ? ◆4、設備操作人員應做好佩帶安全帽、系安全帶等安全保護措施方可作業，在帶電區域工作時，應將車體按規定進行接地，設備登高作業由場地工作負責人進行指揮，指揮人員發出的信號必須清楚、準確。
? ? ◆5、設備作業前，工作負責人應向設備操作人員及參加作業的全體人員進行技術和安全交底，內容應包括：工作內容及要求；安全注意事項及危險點；人員分工情況及責任范圍；工作責任人除要對車況和工作人員工作進行檢查以外，還要負責查看地形環境、起降是否符合安全技術措施的要求或事先制定的工作方案，如有出入，則應制定出相應的措施后方能開始工作。
? ? ◆6、此規定若有與國家或行業規定相抵觸的地方，按國家或行業規定執行。

? ? ? ?以上就是高空作業平臺的基本操作規范講解。設備使用者需養成經常檢測設備的運行情況，定期為設備制定保養計劃。這樣既可延長設備的使用壽命，也能更大程度的保證設備使用者的安全。

? ? ?High-altitude work platform is a movable lift platform used in outdoor or indoor. It is widely used in various industries such as high-altitude work, equipment installation, inspection, etc. The main products of high-altitude work platform are: straight arm/curved arm high-altitude work platform, scissor lift high-altitude work platform (manual push type, self-walking type), mast type high-altitude work platform, cylinder type high-altitude work platform and spider type high-altitude work platform. High-altitude work platform is widely loved by consumers in various industries due to its mobility and flexibility. With the increasing recognition of high-altitude work platform in the domestic market, the scope of platform use is also expanding. Therefore, the standardized operation of high-altitude work platform is particularly important. Below, we will introduce how to standardize the operation of high-altitude work platforms.

? ? ◆ 1. When using a high-altitude work platform, it must be equipped with professional operators who have been specially trained, passed the examination, and obtained a certificate.

? ? ◆2. The driver of the high-altitude work platform must start the equipment after performing various inspections and maintenance in accordance with the maintenance regulations of the machinery, and should check the working range of the equipment before the operation and remove obstacles that hinder the operation and walking of the equipment.

? ? ◆3, The legs are an important preparatory work for the operation of the high-altitude work platform, you should choose a flat ground, the foundation is soft or uneven ground, must be added to the material to ensure that the force after the work.

? ? ◆4, Equipment operators should wear safety helmets and safety belts and other safety protection measures before starting work, when working in areas with electricity, the car body should be grounded according to regulations, the equipment for high-altitude work should be commanded by the person in charge of the site, the signal issued by the commander must be clear and accurate.

? ? ◆5, Before the operation of the equipment, the person in charge of the work shall make a technical and safety briefing to the equipment operator and all personnel participating in the operation, which shall include: the content and requirements of the work; safety precautions and dangerous points; the division of personnel and the scope of responsibility; the person responsible for the work shall not only check the condition of the vehicle and the work of the staff, but also be responsible for checking the terrain environment and whether the take-off and landing meet the requirements of the technical safety measures or the pre-established work plan; if there is any difference, the corresponding measures shall be formulated before the work can begin.

? ? ◆ 6. If there are any conflicts between this regulation and national or industry regulations, national or industry regulations shall prevail.

? ? This is the basic operation standard of aerial work platform. Equipment users need to form the habit of regularly testing the operation of the equipment and regularly making maintenance plans for the equipment. This can not only extend the service life of the equipment, but also ensure the safety of the equipment users to a greater extent.